Know How Many Stages Are Included In Building Inspection

Here we will discuss the stages of building inspection for the new building house.

20:22 24 May 2022

Are you planning to build a new house or building and have some hesitation and doubt about the final product from the contractors? The best way to get relief from such fear is to assign a building inspector. These building inspectors will inspect from the start to the end of the building project. They are also ready for the Building inspection for the old house and the newly bought house and provide the entire report of the building. Here we will discuss the stages of building inspection for the new building house.

 

Inspection of footing:

The first stage is the inspection of the footing. Under the suggested code provisions - the building gets built, the vital point to get noted. The Building inspection requires the inspector to look before the concrete gets poured. Footings are the bottom structural elements of a structure that lie directly on the foundation material and are virtually unreachable once concrete gets fixed. Footing preparations must be done meticulously and under engineers' designs and specifications. Severe mistakes in footings can have devastating consequences that may not get discovered for years.

 

Concrete builders should be careful while placing the concrete to avoid the displacement of concrete reinforcements and segregation. According to the engineer's instructions, every concrete should be of a specific mix, consistency, and compacted when placed.

 

Inspection of wall and roof:

This stage is of inspecting once the wall and roof get completed. It also includes the fire stops, draught stopping, framework, and bracing gets done. The complete framework inspection requires the inspector to watch the structural framework for the standard of the building.

 

An inspection will reveal any faults, defects, or non-conformance-related concerns. These inspections look for structural material compliance, stress grades, wind braces, lintel and lintel support, point loads, horizontal wind beams, load transfer connections to the roof or floor diaphragm, ceiling height, secure and straight framing, among other things.

 

Pre-Plaster stage:

This step gets completed after the services trades (plumbers, electricians, and heating contractors, for example) have completed their work and the wall insulation batts have gets put in, but before the plaster has applied. This step is critical to inspect since it is the last opportunity to evaluate the walls and roof frame before plastering.

 

Inspection of the Fixing and Waterproofing Stage:

Before painting and tiling, the waterproofing membrane had to get installed. We also examine the plasterboard installation and the fastening (doors, architraves, and skirtings) at this time. It is frequently the first opportunity - we have to check the brickwork, which we do if it gets completed during this inspection.

 

Conclusion:

Your new house should get examined during the construction process to catch as many potential problems as possible before it gets completed. Even if you are not required to be there during construction or inspection, it is crucial to understand more about the many stages of the building inspection process hidden behind the walls of a new house and how everything works. The most vital component of this procedure is to employ a competent building inspector to conduct thorough inspections throughout the construction phase.